The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-22-2008, 04:38 AM   #1
tablloyd
Registered User
 
tablloyd's Avatar
 
Join Date: Jan 2008
Location: vancouver, wa
Posts: 49
too low?

A couple of weeks ago, I got my ball joints and steering box replaced in my 70 stepside. When I took it to my mechanic to get it done, he notified me that he had just gotten a pair of almost new 2" drop springs for the front of my truck, bought and installed for only $75 since he was already going to be down there. I accepted eagerly, being that my front end was actually a little bit higher than my rear end, due to new tires. The next day, when i picked my truck up, he informed me that he had installed a new pair of a-arms because the springs would not work with my current ones; no extra charge. Fine by me. Well, the truck ended up lower than i had expected, and it took me about two weeks to decide its lower than i want it. I have heard about putting specific shims around the spring that raise it, but is that a cheap fix for a bigger problem? Also, i was considering just putting air bags in place of what i have. Does that involve replaces the shocks and springs? Sorry if i sound new, i've just never done any suspension before
tablloyd is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com