Carburetor Selection - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vern350 · 05-13-2008, 06:28 AM

I posted a tread similar to this in the engine and drivetrain section and still not 100% on what carb I would like. Truck is going to be a weekend warrior. Motor is a 350 with 69 corvette heads with 2.02 valves. Has a 525 lift/248 duration comp cam in it. Compression ratio is 11.5 to 1. Has standard gears in it right now, I'm assuming 3.07 or 3.08s. Eventually will have 3.73/4.10s. Transmission is a turbo 350 with 2800 stall converter. Edelbrock performer intake.

I would think a Edelbrock Performer 1406/600 cfm or Edelbrock Thunder series/AVS 1806/650 cfm carb would be in the correct cfm range. Would like to go with an electric choke. Does this match my setup or is something larger needed?

05-13-2008, 06:28 AM	#1
vern350 like a rock Join Date: Nov 2004 Location: Ontario, Canada Posts: 517	Carburetor Selection I posted a tread similar to this in the engine and drivetrain section and still not 100% on what carb I would like. Truck is going to be a weekend warrior. Motor is a 350 with 69 corvette heads with 2.02 valves. Has a 525 lift/248 duration comp cam in it. Compression ratio is 11.5 to 1. Has standard gears in it right now, I'm assuming 3.07 or 3.08s. Eventually will have 3.73/4.10s. Transmission is a turbo 350 with 2800 stall converter. Edelbrock performer intake. I would think a Edelbrock Performer 1406/600 cfm or Edelbrock Thunder series/AVS 1806/650 cfm carb would be in the correct cfm range. Would like to go with an electric choke. Does this match my setup or is something larger needed?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.