Sway Bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 05-19-2008, 08:10 PM

No, you don't have to have one for the rear. Yes, it would be a bonus but it won't be detrimental if you don't.

I bought a used sway bar off of a C-20 along with the required clamps. Since my truck is lowered I also bought the lowered stands, but you won't need them. We replaced the worn out bushing with no ones from NAPA along with fresh bolts and she was good to go. It made a noticeable difference in body roll, but did not make it to stiff or adversely effect the overall package.

If you want to consider a rear bar look at Burbs.

05-19-2008, 08:10 PM	#16
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Sway Bar No, you don't have to have one for the rear. Yes, it would be a bonus but it won't be detrimental if you don't. I bought a used sway bar off of a C-20 along with the required clamps. Since my truck is lowered I also bought the lowered stands, but you won't need them. We replaced the worn out bushing with no ones from NAPA along with fresh bolts and she was good to go. It made a noticeable difference in body roll, but did not make it to stiff or adversely effect the overall package. If you want to consider a rear bar look at Burbs. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 05-19-2008 at 08:11 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.