Sway Bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LEEVON** · 05-20-2008, 05:57 AM

You will really like the improvement of the sway bar, it's very noticeable. I considered my truck nearly undriveable because of the extreme body roll in curves, it just didn't feel safe. I was lucky enough to find a junkyard with a bunch of them, and they pulled one complete with brackets for $40. Added $22 Moog poly bushings and $10 worth of grade 8 hardware and it was done.

I wouldn't hesitate to do the Addco from Summit if you don't have a junkyard close and/or time is an issue. It's really a huge improvement regardless of the cost.

05-20-2008, 05:57 AM	#21
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,919	Re: Sway Bar You will really like the improvement of the sway bar, it's very noticeable. I considered my truck nearly undriveable because of the extreme body roll in curves, it just didn't feel safe. I was lucky enough to find a junkyard with a bunch of them, and they pulled one complete with brackets for $40. Added $22 Moog poly bushings and $10 worth of grade 8 hardware and it was done. I wouldn't hesitate to do the Addco from Summit if you don't have a junkyard close and/or time is an issue. It's really a huge improvement regardless of the cost. __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.