The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-02-2003, 02:26 AM   #1
steves1967
Registered User
 
steves1967's Avatar
 
Join Date: Dec 2001
Location: Manteca, Ca USA
Posts: 307
heater/ vacuum line problems

Okay, here goes- from as far back as i can remember the heater has always blown hot air out of the vents, it did have AC at one time but i pulled the compressor out- even when the heater is off. So i started messin' around and found that there is no vacuum signal to the heater hose valve on the fenderwell under the hood. The vacuum line is there but no vacuum- I do have vacuum from the carb- and that line goes in to the passenger compartment- but where does it go from there?? And secondly the center vent on the dash- the vent is metal but the housing is plastic- when the vent gets hot it melts the housing and now the vent won't stay open- do they make a metal housing?? THANKS
steves1967 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com