Lets talk Shocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BaddBusa2005 · 07-09-2008, 11:55 PM

Ok guys I am down to just buying new shock all the way around. I want a good right quality and firm bump control. I do not want my teeth beat out of my head over bumps and pot holes if not avoidable.

I have looked into the toxic shocks and the summit drop shocks, I cannot get a good answer out of anyone at Edelbrock for their IAS shocks.

I just want everyones opinion, as there are a ton of lowered trucks on here.

The truck will be lowered as below:

Front
2.5" spindle
3" coils

Rear
Flip Kit
2" Shackles

07-09-2008, 11:55 PM	#1
BaddBusa2005 Registered User Join Date: Feb 2006 Location: Cleveland, TN Posts: 440	Lets talk Shocks Ok guys I am down to just buying new shock all the way around. I want a good right quality and firm bump control. I do not want my teeth beat out of my head over bumps and pot holes if not avoidable. I have looked into the toxic shocks and the summit drop shocks, I cannot get a good answer out of anyone at Edelbrock for their IAS shocks. I just want everyones opinion, as there are a ton of lowered trucks on here. The truck will be lowered as below: Front 2.5" spindle 3" coils Rear Flip Kit 2" Shackles __________________ 1981 Custom Deeluxe SWB 5.3/4L60e 3.73 and Auburn. Mustang Dyno 265hp/258tq

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.