Scotts IFS. Suspension built just for 67-72

[jephs422]

Typically enthusiasts know Scott's for building show winning Hotrods and often overlook the largest part of our business; building independent front suspensions and chassis's. Here's a quick look at the 67-72 Chevy Truck suspension that welds directly into your stock frame.



Specs-

2x4-3/16" wall drop in cross-member.



1-1/8"x1/4" wall DOM tubing a-arms.

Scott's Billet Rod Ends top AND bottom



Manual or power rack with outer tie rod ends included.

spindles (standard height or drop)

11" rotors vented rotors and GM calipers (all hardware and bearings includedP

Your choice of airbags and shocks or Coilover shocks.



All of Scott's Front Suspensions come with a lifetime guarantee against manufacturers defects.

To answer the first question....No, these are not mustang II suspensions we build.

EVERY front end we manufacture is built to spec and built per application. For example; you have a 67 Chevy truck and you are running a 30" tall tire. Ultimately at ride height you want the bottom of the frame to be 5" off the ground. Well, that's where we will build it. We will design a crossmember, then a set of a-arms, and put it all together so it will function and ride correctly for you.

In contrast, is someone wants an airbag suspension and is looking to lay frame, and is running a 29" tall tire.....we can do that too.

So you end up with everything you need for the front suspension for under $2300.00 to start. Of course we can add different brakes, set you up with the u-joints you need, or even hook up your column. Whatever you need, let us know.