old skool suicide doors plan? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

robin58 · 10-24-2008, 04:40 PM

It's not that hard with factory hinges but is easier with newer kits you can get. Just be sure you get some that are narrow enough to get into the door pillar. If you get the standard ones they're a little tough to spread out far enough apart and keep in a vertical plane (supports door better). Hagan makes some narrower kits.

Basic installation is easy though, just follow the basics here:

http://www.*****************/content/...0-daily-driver

and use common sense.

Older picture after I'd done mine:

10-24-2008, 04:40 PM	#4
robin58 Registered User Join Date: May 2007 Location: Louisiana Posts: 763	Re: old skool suicide doors plan? It's not that hard with factory hinges but is easier with newer kits you can get. Just be sure you get some that are narrow enough to get into the door pillar. If you get the standard ones they're a little tough to spread out far enough apart and keep in a vertical plane (supports door better). Hagan makes some narrower kits. Basic installation is easy though, just follow the basics here: http://www.*****************/content/...0-daily-driver and use common sense. Older picture after I'd done mine:

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.