Sliping tranny! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SweTruck · 10-26-2008, 01:08 PM

Hi all,

In my 57´ truck there´s a chevy 350/350 combo. I´m not that good on automatic transmisions. But I did recognize the pan bolt pattern. The tv is adjusted by wire, and there´s a vacuum line that hooks up to the transmission.

Problem; It is i sliping!

Symptom: After driving for a few minutes it starts to slip. A lot. If I stop or slow down it engages again.

When I first noticed, I looked at the dipstick, the level was on the "ok" mark but I filled up a pint anyway. It got better but not good. Now it´s way over the "ok" mark. I don´t know what happens if I overfill it.

Q: any tips or hints? Is there any ajustments to be made?

Take care

//Swetruck

10-26-2008, 01:08 PM	#1
SweTruck Registered User Join Date: Aug 2008 Location: Huddinge, Sweden Posts: 14	Sliping tranny! Hi all, In my 57´ truck there´s a chevy 350/350 combo. I´m not that good on automatic transmisions. But I did recognize the pan bolt pattern. The tv is adjusted by wire, and there´s a vacuum line that hooks up to the transmission. Problem; It is i sliping! Symptom: After driving for a few minutes it starts to slip. A lot. If I stop or slow down it engages again. When I first noticed, I looked at the dipstick, the level was on the "ok" mark but I filled up a pint anyway. It got better but not good. Now it´s way over the "ok" mark. I don´t know what happens if I overfill it. Q: any tips or hints? Is there any ajustments to be made? Take care //Swetruck

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.