Turn signal switch / wheel lock removal tool FYI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pkbinplano · 11-23-2008, 01:45 PM

FYI if your replacing your turn signal switch, or rebuilding your column, Auto Zone has GM tool part number J2365-A, under tool number 27044 for $15. This is a must when removing and installing the wheel lock plate, as a big spring must be compressed when removing/installing a snap ring. They also have the turn signal switch for $25. Got as far as getting down to the switch, then put it back together untill next weekend. PS my switch has a broken return spring, and no, the new springs on the new switch isn't the same. Was going to just swap a spring. LOL

11-23-2008, 01:45 PM	#1
pkbinplano pkbinplano Join Date: Nov 2002 Location: Plano Texas Posts: 370	Turn signal switch / wheel lock removal tool FYI FYI if your replacing your turn signal switch, or rebuilding your column, Auto Zone has GM tool part number J2365-A, under tool number 27044 for $15. This is a must when removing and installing the wheel lock plate, as a big spring must be compressed when removing/installing a snap ring. They also have the turn signal switch for $25. Got as far as getting down to the switch, then put it back together untill next weekend. PS my switch has a broken return spring, and no, the new springs on the new switch isn't the same. Was going to just swap a spring. LOL __________________ http://www.picturetrail.com/gallery/...7496&members=1 84 chevy silverado aka The Bananna Boat

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.