|
Lower a arm brackets and mounting
I went to bolt my lower arm to my 83 c10 tonight only to find out that the lower a arm mount that I have will not work. The holes to mount it in my crossmember are 2 5/8 from center hole to center hole. The stock 83 crossmember holes are 2 1/8 apart. I have a custom fabricated front crossmember in which I have already powder coated and have bolted to the frame. I have powder coated my a arms and all other components. Could this front crossmember posibly be from another year truck and bolted up to my 83? Does anyone know if the lower a arm shaft is a larger or smaller diamter in lets say the 67-72 trucks. I will atach pics below. Anyone that has any idea here please chime in and let me know!!! Notice in the pics that the holes do not line up.
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448
|
02-24-2003, 11:06 PM
Threaded Mode