swap out.

[raynmanx]

Hi guys. first time post and it might seem a little strange of what i want to do so here goes. I have a 77model c20 that i am doing up over here in Australia and what i want to do is ditch the rear dana 8lug diff for a 9 inch from a F-truck which is pretty straight forward. but what i want to know is if i want to change the front to 5 lug C10 do i have to get C10 spindles,discs calipers and so on or are the lugs pressed in to the rotors and i can make the change like that or are they different. Any help on this subject would be much appreciated