'84 K-20 Chassis (Parts or whole) & Aluminum Serp Setups

[arkracing]

I have an '84 K20 Chassis with a 10b front end and a 14b semi-float rear end. I'm not sure what gears are in it though - I can check, but I think that the are pretty high for a 4x4 as the truck was originally a deisel and the PO converted it to gas. No motor/tranny, but I do have the NP208 that was in it. The chassis is in great shape - the only problem is that someone cut the back 12" or so of it, basically from the spring hanger back.

I'll part out the chassis if someone needs anything such as spring hangers or cab mounts, rear end, front end, springs, whatever.
$300 complete or will price parts if there is interest, or partial trade (I need a 3/4ton 10b Front End with 4.10 gears)

NP208 Transfercase with TH350/700R4 Adaptor and coupler $125

I also have a pair of the small fuel tanks that came out of a '81 SWB 4x4 truck. They are in super nice condition.
$50 for the pair with senders and brackets

I aslo have 2 serp setups - one is from a V8 and the other a V6. The both take the big A/C compressors. Great to convert your truck over to a Serp belt setup. Both units will include the powersteering pump and all the pulleys/tensior needed. I can also provide alts. for a few extra bucks. I only have pics of the one that came off the V8. They look the same and are both the aluminum ones (not the '88-'89) steel versions.
$75 each setup