5/7 static drop on a 90 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spray-Bomb · 01-10-2009, 03:33 AM

Hey guys, I am thinking about doing a 5/7 static drop on my 90 Ext-cab SWB & was wondering what kinda stuff I may run into

I plan to cut one round off the front coils & use 2" drop spindles, then flip the back & use shackles to get the other inch & notch, box, & beef up the frame around the notch

I have heard that there are mods needed to be done to the LCAs ???
And is there anything above the pumpkin that needs to be modded ??? (like a X-member)

Thanks, Matt

01-10-2009, 03:33 AM	#1
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	5/7 static drop on a 90 Hey guys, I am thinking about doing a 5/7 static drop on my 90 Ext-cab SWB & was wondering what kinda stuff I may run into I plan to cut one round off the front coils & use 2" drop spindles, then flip the back & use shackles to get the other inch & notch, box, & beef up the frame around the notch I have heard that there are mods needed to be done to the LCAs ??? And is there anything above the pumpkin that needs to be modded ??? (like a X-member) Thanks, Matt __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 01-10-2009 at 03:36 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.