headlight relay install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 01-12-2009, 12:15 AM

I got a dual realy holder and relays a while back and installed them today. I followed the how too found in thr FAQ section. Verey easy upgrade.
I didnt want to cut the old harnnes so I used spade conecters and just pluged them in. (as per chifs tip ) I also used a 30 amp circuit breaker instead of a fuse.
I didnt post any pics becuse the faq has them. But I do recomend this easy diy upgrade. Before at idle,when I would put on the head lights the volt meeter would drop to 12volts, now it drops to just a hair under 14 volts !!
do the relay upgrade its cheep and easy.
dual master cylider upgrade is next on list

01-12-2009, 12:15 AM	#1
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	headlight relay install I got a dual realy holder and relays a while back and installed them today. I followed the how too found in thr FAQ section. Verey easy upgrade. I didnt want to cut the old harnnes so I used spade conecters and just pluged them in. (as per chifs tip ) I also used a 30 amp circuit breaker instead of a fuse. I didnt post any pics becuse the faq has them. But I do recomend this easy diy upgrade. Before at idle,when I would put on the head lights the volt meeter would drop to 12volts, now it drops to just a hair under 14 volts !! do the relay upgrade its cheep and easy. dual master cylider upgrade is next on list __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.