|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-12-2009, 08:47 AM
|
#1 |
|
"THE GREEN GOBLIN"
Join Date: Mar 2008
Location: Fremont Ca.
Posts: 1,025
|
BBC Radiator hoses & Electric Water pumps What to use
What are you guys useing For the LOWER HOSE Part Numbers Purchase place Ext?? The origanal Hoses will not work.
I have a 72 chevy C-10 454BB with an Electric Water Pump the best hose I found was for a 1975 BB Chevy Truck The curves are a perfect match the part that goes on the water pump is a perfect fit... BUT THE PART OF THE HOSE THAT GOES ON THE RADIATOR IS A BIT TOO SMALL IT SEEMS TO BE THE SAME SIZE AS THE Radiator OUTLET ITS A VERY VERY TIGHT FIT IT TOOK ME A LONG TIME TO GET IT TO FIT I LUBERICATED THE END OF THE HOSE AND WITH A LOT OF STRUGGLEING I FINALY GOT IT TO A SPOT TO PUT A CLAMP ON IT, BUT THIS FOR SOME REASON DOESN'T LOOK GOOD TO ME OR SAFE NOW THAT I THINK OF IT.... Please guys who has this simular setup and what are you guys using.... 454BB Th400 No/AC 3Core Radiator with Transmission Cooler, And Thanks again for your help.... Pablo
__________________
 Petey-pablo"THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi  SoldDrive it like you stole it!  Petey-pablo@sbcglobal.net Last edited by petey-pablo; 01-12-2009 at 08:48 AM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode