350 Engine Pics / Air Cleaner Options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69gumby · 02-21-2009, 12:05 PM

I am changing the carburetor on my truck to an Edelbrock 1406 and while I was making the swap I found an Aluminum Edelbrock manifold on my truck. It was just hidden under a fine layer of patina, ok old grime. I have just about got things finished except for the Air Cleaner. My old one was a 10"X2" and as I read the Edelbrock Owners Manual they say I need a 14"X3", I always thought my truck ran a bit fat.

I would like to see what other folks are running.

How did you hook up the breather tube or is putting a breather in the valve cover better?

02-21-2009, 12:05 PM	#1
69gumby Registered User Join Date: Nov 2007 Location: Sacramento California Posts: 194	350 Engine Pics / Air Cleaner Options I am changing the carburetor on my truck to an Edelbrock 1406 and while I was making the swap I found an Aluminum Edelbrock manifold on my truck. It was just hidden under a fine layer of patina, ok old grime. I have just about got things finished except for the Air Cleaner. My old one was a 10"X2" and as I read the Edelbrock Owners Manual they say I need a 14"X3", I always thought my truck ran a bit fat. I would like to see what other folks are running. How did you hook up the breather tube or is putting a breather in the valve cover better? __________________ 69 sweet long fleet, David

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.