suspension questions. what would you do?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79gmcc15 · 05-24-2009, 09:07 PM

I am just gathering/learning info here. with our trucks, and without lowering the truck much, IE no slamming it, I am talking an inch maybe 2 at most here but prefer to not. what would it take for the truck to handle the best? I am talking, your ideal suspension with the guidelines I have layed down. and if some how, you come up with putting a Corvette front end in it. then come up with a senerio that is the most radical and with stock components. I would do a search but I don't know enough about it to know what to search for. but I am mostly wondering What Would You Do???

05-24-2009, 09:07 PM	#1
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	suspension questions. what would you do?? I am just gathering/learning info here. with our trucks, and without lowering the truck much, IE no slamming it, I am talking an inch maybe 2 at most here but prefer to not. what would it take for the truck to handle the best? I am talking, your ideal suspension with the guidelines I have layed down. and if some how, you come up with putting a Corvette front end in it. then come up with a senerio that is the most radical and with stock components. I would do a search but I don't know enough about it to know what to search for. but I am mostly wondering What Would You Do??? __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.