SD Rear Cantilever Lift System

[Thorbecke Bros.]

We have put together a rear cantilever lift system that gets 12+ inches of lift. The kit comes with weld in side plates that position both crossmembers in the correct place. The crossmember tubes are 48" long so there is plenty of extra tube to run through the factory frame rails for extra strength. The lift arms rotate on precision sealed bearings so there is no bushings to wear out. This kit would be good for those who want something eye catching and are not worried about removing some bed floor to show it off. The price for this kit runs $999.99.

[IMG]http://www.*****************/files/canti-weld-on2-web.jpg[/IMG]

[IMG]http://www.*****************/files/canti-weld-on-web.jpg[/IMG]


There is an option to have the upper shock mounts built into the system like pictured here.
[IMG]http://www.*****************/files/canti-weld-on-detail-w.jpg[/IMG]


Here is a complete Cantilever Backhalf that we offer for the S10.
[IMG]http://www.*****************/jason/images/ck4.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ck5.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ck6.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ck7.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ck9.jpg[/IMG]

[IMG]http://www.*****************/jason/images/ck2.jpg[/IMG]