|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
08-30-2009, 11:32 PM
|
#1 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Checking Rod to Cam Clearance
We're finally getting around to assembling my son's 406 with 5.7 Scat rods. We have discovered that we have a clearance issue with #6 rod with the cam. How in the heck do you get in there to measure the clearances to be sure there is at least .060? Do you have to do it with only one piston and rod in the block at a time?
Any tips or advice is appreciated. 
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 08-30-2009 at 11:32 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode