The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-10-2009, 08:28 PM   #26
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: Ebrake question for rear disc conversion..?

The use of the emergency brake is mandatory if you're using the Cadillac Seville calipers. The reason is, the air gap between the brake pads and the rotor is set by the usage of the e-brake. The piston assembly has a ratchet-type mechanism that resets itself everytime you set the e-brake. If you don't use an e-brake on the Caddy calipers, then as the pad and rotors wear, your air gap increases and causes a long pedal when you push the brakes.

That's why when you find a set of Seville rear calipers in a wrecking yard, the pads are usually perfect because most people with big luxury boats that don't have to park on a hill never set the e-brake.

I did a ton of research on this subject, bought all the parts, but sold the truck I was going to do the conversion on. The parts are just sitting on the shelf in the boxes collecting dust.
chevyrestoguy is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com