|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-25-2010, 01:09 PM
|
#1 |
|
Collector of rusty Items
Join Date: Dec 2001
Location: Sisters,Oregon USA
Posts: 731
|
Question about 1990 blazer brakes
I have a 90 k5 blazer that I am putting dana 60 and corp14 axles under. I have a doner truck that has hydro-boost brake that I an grafting into the K5.
My question is this. What to do with the wires that come out of the factory proportioning valve? I assume there are two switches and that if if short the 2 pairs of wires to each other that everything will work. Or, can I just unplug the connector and be fine? Thanks in advance TW Scannell
__________________
Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode