OH Suburban rolling chassis

[badboy007]

The frame is from a '69 Suburban. It has been sandblasted, primered and undercoated. It has been lowered using RideTech Strongarm upper and lower control arms. It also has 2" dropped spindles and a 1.5" sectioned front crossmember. The setup also has RE7 & RE8 airbags, 2 five gallon air tanks, 2 Viair 380 compressors, 8 SMC valves, 3/8" air line, 4 Monroe shocks, front and rear swaybars w/ poly bushings, new balljoints, idler & pitman arms, tie rod ends and adjusters. It has a welded in C-notch. The frame sits about 3" inches from the ground in the front. The crossmember sits about 1.5" from the ground. Spindles have surface rust where it had to sit outside following my last transfer, but prior to frame being blasted.

All of this is brand new and has never seen any "road time". The work was professionally done by Smith ChassisWorks in Louisville, KY. I'm not interested in parting the chassis out. $2500