clutch fork

[TheDark1]

I don't know if I put it in the inside hole or not. The Z-bar was hitting my headers, so I chopped it off and moved it over on the tube. I may have put it in the inside for better alignment. Unfortunatlely, I did it almost 20 years ago, so I don't remember the right hole (get your mind out of the gutter). You can also see that I welded some nuts on it as spacers to take up some slack in the clutch movement. You need the wedge and the long spring for sure. Then put it in the hole that lines up the best. Outside hole should give you less pedal pressure but more pedal travel, inside hole should give you less pedal travel and more pedal pressure. Jeff