|
05-08-2010, 10:03 PM
|
#1 |
|
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Help!
Alright guys I have a 64 that I back halfed. I'm running a SD wishbone. It has the stock 12 bolt.
Ok I measured from the drum mounting plate to the tube of the center section and got 20 1/8" on both sides. So I took my wish bone and put the axle brackets on it. Measured both sides and set the brackets the same from the center section. After tacking it up and looking at the front of the wishbone the pinion sits offset to the right of the piviot on the wishbone.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 Last edited by ruffrida2005; 05-08-2010 at 10:46 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode