|
06-02-2010, 07:08 PM
|
#1 |
|
AKA "Hurricane Hank"
Join Date: Sep 2003
Location: Elk Point, South Dakota
Posts: 316
|
stripped bolt hole
Hey all. haven't been on this site in almost a year. Glad to see it still up! I just rebuilt my th350 & got it installed only to find the "s" pin inside on the linkage was backwards. I took the pan back off & got that turned around, but when putting the pan back on, I stripped one of the holes at the back of the tranny by the modulator. I struggled for an hour or so trying to get a smaller bolt through the hole & put a nut on it, but couldnt.
Am I better off just rethreading the hole & putting in a bigger bolt? I don't own a tap & die set, but I'm sure I have a friend or two with one.
__________________
"looking back, knowing that you gave it your all.... win or lose, you finish a Champion" Dale Earnhardt "They say hard work never killed anyone, But why take a chance?  63 GMC C10 Custom LWB 355/350 AT 00 Chevy Silverado 1500 base V6/AT 07 Chevy Monte Carlo SS 5.3 V8 |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode