The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-06-2010, 09:32 AM   #1
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
WIW and a couple questions

Have a guy I buy and sell parts to locally who's into our trucks. He offered me a 6.0 . Here is his email response to questions about it.

Quote:
its a 2004 truck z71 motor with 34k on it it has all pulleys and truck intake has the 2002 bbk throtllebody sowe you can have a cable on it after 02 they dont have a cble on body and you have to body the body and cable.. i have the bradeid cable to new is a must have if putting a old car ..he paid $680 for bbk and cable it is a drop in for a 67-72 truck for it is the same about same as a 68-72 chevelle he shouwed me the papers he had $2000 in motor $680 in bbk throtlebody and cable for old cars $85 in low mount a/c ... plus the computer $150 $850 painlesswiring but they are gone but all the wire plugs are there on motor just need computer and add some wiring.
It was a project to go into a chevelle but had the wiring and computer stolen by a druggie..... but supposedly the coils with wires are still there and not hacked up. I will of course check that out. Is there anything else to look for??? I don't think the comp and wiring is a huge deal since they seem to have come down in cost and I was going to send them out to be modified anyways. What else should I be checking to see if it's included (starter?, etc?)
Supposedly the pulley setup is all there including the parts for low mount A/C and in additon there is the BBK throttle body he mentioned. Anybody used those before and know of any issues with that setup? Anything else I can visually check without tearing into the motor? Block numbers to look for to verify year/size/heads? I am going through the FAQ now trying to look for those answers.

He's asking 1000....think I might be able to get it for $800. Is it worth it with the A/C part and the BBK parts? Thanks.
__________________
Looking for a 67-72 swb or blazer project in or around VA.

Last edited by VA72C10; 10-06-2010 at 09:33 AM.
VA72C10 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com