Truck will not start. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MalibuSSwagon · 12-03-2010, 05:01 PM

So I was doing a bit of welding today on my trailer, BUT I forgot to disconnect the light plug between the truck and trailer. Now the truck will not start, is it possible that I blew the fuseable links or any under dash fuses with feedback from the welder? I checked the battery voltage,its fine. I have not had a check to check for voltage at the starter. Issue is, it just clicks once when I turn the key. It is a year old Autozone starter that has hot start issues.

Any thoughts? A diagram so I can check the voltage at the starter later?

12-03-2010, 05:01 PM	#1
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Truck will not start. So I was doing a bit of welding today on my trailer, BUT I forgot to disconnect the light plug between the truck and trailer. Now the truck will not start, is it possible that I blew the fuseable links or any under dash fuses with feedback from the welder? I checked the battery voltage,its fine. I have not had a check to check for voltage at the starter. Issue is, it just clicks once when I turn the key. It is a year old Autozone starter that has hot start issues. Any thoughts? A diagram so I can check the voltage at the starter later? __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.