show your67 72 chevy spot light trucks

[markeb01]

Originally Posted by 67chevy1series

i would like to replace my handle assembly and the little badge at the top where it says unity or gm i need the part numbers , idont know them . i want to go on the unity site and look up so i can order them

The Unity crest is part number 6295-U

http://unityusa.3dcartstores.com/629...ent_p_484.html

The GM crest is part number 6295-GM

http://unityusa.3dcartstores.com/629...ent_p_473.html

And the GMC crest is part number 6295-GMC

http://unityusa.3dcartstores.com/629...ent_p_474.html

The only handle parts I find listed for the vintage lamps online are the following. Note – these are a direct interchange with the original vintage handles, but they are not exact duplicates. Vintage handle housings have a clip and two screws over the wire where it leaves the housing. The later design has a smooth raised ridge in this area. It’s actually cleaner and neater, but not authentic if that matters. Also the newer parts come with Phillips head screws where the originals were slotted. Early and late screws are the same thread size so they can be interchanged.

http://unityusa.3dcartstores.com/675...bly_p_615.html

http://unityusa.3dcartstores.com/838...Kit_p_552.html

I don’t know the difference between these last two bare handle housings:

http://unityusa.3dcartstores.com/831...ing_p_507.html

http://unityusa.3dcartstores.com/600...ing_p_506.html

I have dealt with Unity directly and they were very friendly, helpful, and supportive. But after pricing the parts and before placing an online order, you might want to check with Accesoryland. It’s a mom and pop shop so he’s a little slow to respond, but very helpful and knowledgeable. He has a large inventory of obsolete parts, and also has direct access to the Unity factory inventory. Here is his web link:

http://www.dandrfoods.com/accessoryl...spotlights.htm