|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-09-2011, 07:29 PM
|
#1 |
|
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
injector placement question
I couldnt think of a better title. Basically I am going to be re-doing the engine harness with some
 and while staring at the engine, I was thinking about rotating the injectors 180* so the connector is pointing towards the intake v/s stock position of pointing outwards. I think this will make the engine harness a little cleaner. I dont think it will affect driveability b/c of the injectors are rotated, but I dont know. Anyone here done something like this before? clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode