driveshaft making noise - The 1947 - Present Chevrolet & GMC Truck Message Board Network

radtad767 · 02-23-2011, 04:20 PM

I lowered my 69 c10 5/7.5 and installed disc brakes. My exhaust would not work so I changed it to dump before the rear axle. I thought the noise was coming from the axle hitting the exhaust so I fixed that. The problem still is there. It only happens when I barley push on the throttle. I can accelerate through the noise and when I come off the throttle it comes back until I reach a certain mph. Which makes me think it could be the driveshaft. What do I have to do to fix this?

02-23-2011, 04:20 PM	#1
radtad767 Registered User Join Date: Nov 2009 Location: rockwell, nc Posts: 15	driveshaft making noise I lowered my 69 c10 5/7.5 and installed disc brakes. My exhaust would not work so I changed it to dump before the rear axle. I thought the noise was coming from the axle hitting the exhaust so I fixed that. The problem still is there. It only happens when I barley push on the throttle. I can accelerate through the noise and when I come off the throttle it comes back until I reach a certain mph. Which makes me think it could be the driveshaft. What do I have to do to fix this?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.