|
Re: edelbrock problems
just pulled the carb off. intake is infact square bore and dual plane. before i took it off i started it up and it idled fine, reved fine etc. turned it off, and it wouldnt start back, so i let it sit about 20 seconds and it would try to start as it would turn over, but wouldnt crank. its very inconsistent. when i did get it to start it was choppy and spat and sputtered for about 10 seconds and required me to pump it to keep it running. it smoothed out after a sec and idled fine. so is this a timing issue? im baffled
|
03-31-2011, 08:03 PM
Threaded Mode