Suspension experts, is this a mistake?

[m6z]

Originally Posted by SCOTI

Should you continue on w/what you have is subjective. To me, the main priority would be the quality/execution of the current fabrication. The next deciding factor would be how much do you currently have invested (not including the air ride stuff)? That is a major factor in what to do. If you're too deep into that set-up, some possible options....

Drop spindles up front should help get things closer to 'evened out' as far as F/R height & not hurt the wallet too bad. The narrowed a-arms could be purchased later if needed. You might need to narrow the track width, or, you might be able to use everything as is w/the 'right' wheel back-spacing (*right = optimal for this application).

If there's no possible way the front track width will work w/o the narrowed a-arms because of a super low ride height & $1300 is more than you want to spend additionally toward the chassis..... you already know your answer.

I'm going to have to agree with Scoti. If its quality work and you can get what you have to work. Why not use it? Selling it and starting over is going to most likely put you even deeper in the hole. It's all what you want to do, but if I was that far into it I want to continue on and get it on the road.