what front brake hose to use with a 4 1/2 / 6 inch drop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sduckworth13 · 06-26-2011, 08:40 PM

I have a 1967 GMC 3/4 ton I just did a 4 1/2 /6 inch drop, 5 lug disc/ drum conversion with a 1974 Chevy 1/2 ton suspension. I ordered the brake hoses for a 1974 Chevy 1/2 ton and they don't seem to fit right. The hose fitting to the caliper is touching the upper ball joint castle nut and is not seating correctly on the caliper. What hoses should I use to clear the hose from touching the spindle. What hose should I use, can someone plz help me.
Thanks,
Scott

06-26-2011, 08:40 PM	#1
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	what front brake hose to use with a 4 1/2 / 6 inch drop I have a 1967 GMC 3/4 ton I just did a 4 1/2 /6 inch drop, 5 lug disc/ drum conversion with a 1974 Chevy 1/2 ton suspension. I ordered the brake hoses for a 1974 Chevy 1/2 ton and they don't seem to fit right. The hose fitting to the caliper is touching the upper ball joint castle nut and is not seating correctly on the caliper. What hoses should I use to clear the hose from touching the spindle. What hose should I use, can someone plz help me. Thanks, Scott Last edited by sduckworth13; 06-26-2011 at 09:33 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.