![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
![]()
How the heck do the outer wheel bearings come out on these? Mine is a 71 C20 with the Eaton H052 rear.
I see a big clip inside that refuses to come out. I did a search on this forum and found a thread where someone removed that clip and the bearing still would not come out. ?? Before I go any further, I figured I better ask. ![]() I was getting a light rubbing/grinding sound and found a leaky seal on one wheel so when I pulled it apart, the inner bearing is going, has pits in the bearings. There is some metal particles in the oil from this. Any chance that might have ruined the other bearings? This is why I want to remove the outers so I can inspect them. Going to pull it all apart and clean, then do fresh gear oil too. Thanks for any help, Bob
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|