72 swb project update! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BIG ORANGE** · 08-10-2003, 10:39 PM

Well I removed the 6banger and the 3swapper also the xmember and manual st. box and replaced all that with a BB 402 and a freshly rebuilt 400 turbo included headers,PS and PB and tilt. Havent cranked her up yet,need a lower alt. bracket that aftermarket one I bought from a fellow board member want work with the remote PS setup! I put a 1 piece driveshaft in it and I'm dropping her 2" in the front and rear and giving her some new monroe shocks after that a couple small patch panel repairs and she will get a paint job and the flowmaster exhaust and then hit the road!
Anyway thanks for listen.

08-10-2003, 10:39 PM	#1
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	72 swb project update! Well I removed the 6banger and the 3swapper also the xmember and manual st. box and replaced all that with a BB 402 and a freshly rebuilt 400 turbo included headers,PS and PB and tilt. Havent cranked her up yet,need a lower alt. bracket that aftermarket one I bought from a fellow board member want work with the remote PS setup! I put a 1 piece driveshaft in it and I'm dropping her 2" in the front and rear and giving her some new monroe shocks after that a couple small patch panel repairs and she will get a paint job and the flowmaster exhaust and then hit the road! Anyway thanks for listen. __________________ Things happen for a reason!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.