Does the 400 trans have a port to plug in a trans temp gauge? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slowtruk · 09-06-2011, 10:11 PM

Guys, I am installin a coole on my trans, and already have all that figured out, What Ineed to know is, is there a port on the side of the 400trans so I can screw in the sensor for a trans temp gauge and then run my wire to it? Like this one...

http://www.summitracing.com/parts/ATM-4357/

If not, I could install one inline in the rubber hose AFTER its went through the radiator and cooler, right? But which gauge kit would I buy?

Thanks a lot guys

09-06-2011, 10:11 PM	#1
Slowtruk Registered User Join Date: Aug 2011 Location: Lumberton Texas Posts: 378	Does the 400 trans have a port to plug in a trans temp gauge? Guys, I am installin a coole on my trans, and already have all that figured out, What Ineed to know is, is there a port on the side of the 400trans so I can screw in the sensor for a trans temp gauge and then run my wire to it? Like this one... http://www.summitracing.com/parts/ATM-4357/ If not, I could install one inline in the rubber hose AFTER its went through the radiator and cooler, right? But which gauge kit would I buy? Thanks a lot guys __________________ IBEW Electrician-Nick 1985 C20 Silverado 1965 C-10 short fleet 1961 c-10 Apache short fleet 2005 Chevy Suburban LT 2012 Hyundai Sonata

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.