700R4 Install almost read - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SS317 · 09-16-2011, 01:02 PM

Ok I have a question or two. I'm about ready to install a 700R4 in my 66 long bed and remove the old powerglide. I have The tranny, new crossmember, TC lockup kit and I'm ordering the TV made easy stuff from bowtie overdrives. I think the only thing I have a question on is will the tranny cooler that is integrated into the radiator (new 2 months ago) work well enough for a tranny cooler or should I add another one in there?

Is there anything else anyone can think of before I dive into this? I'll have the drive shaft trimmed after I get everything installed and can measure properly.
What am I missing?

09-16-2011, 01:02 PM	#1
SS317 Registered User Join Date: Dec 2010 Location: Fruita, Colorado Posts: 222	700R4 Install almost read Ok I have a question or two. I'm about ready to install a 700R4 in my 66 long bed and remove the old powerglide. I have The tranny, new crossmember, TC lockup kit and I'm ordering the TV made easy stuff from bowtie overdrives. I think the only thing I have a question on is will the tranny cooler that is integrated into the radiator (new 2 months ago) work well enough for a tranny cooler or should I add another one in there? Is there anything else anyone can think of before I dive into this? I'll have the drive shaft trimmed after I get everything installed and can measure properly. What am I missing? __________________ 1966 Chevy C-10 350 Engine 700R4

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.