You need to change the upper & lower balljoints,Lower a arms(due to the hole size for the ball joint), & the outer tierod ends.....that should get your spindles,rotors/calipers mounted. you might check with auto parts on the master cyl.....Im not sure, but think 1/2 & 3/4 are a different pn. good luck,crazyL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|
08-15-2003, 07:43 PM
Threaded Mode