|
01-04-2012, 11:28 PM
|
#1 |
|
Registered User
Join Date: Jul 2005
Location: Saskatchewan
Posts: 189
|
6L80E questions
I just picked up a 17,000 mile 6L80E from my insurance company out of a 2007 2wd Sierra. It's going into my 1981 GMC someday but I've got some questions that so far I haven't found answers on here for.
1. What yoke does the trans need? I'm unsure what yoke I'll need to run and the trans didn't come with one. I'm supposing my best bet is to order one from GM for the truck the trans came from and have a new driveshaft built with 3/4 ton u-joints. But if I do that, how am I going to mate it to the 12 bolt rear? 2. I picked up an ECM (PCM) from them as well. They said that it mounted near the battery on the donor truck. But I've read on the net that the ECM is internal in the trans. Anyone confirm that there should be an external or internal ECM? Thanks.
__________________
Stu- 1981 GMC Sierra Classic LWB 355- original 2 bolt block, 10.2:1, vortec heads, Comp XE268 cam, built by self in 1992 700R4-2000 stall with lockup, shift kit, Corvette servo 3.07 open diff- I need a 3.73 posi! 2nd owner since 1986 - 388,000 km and counting. 100k by the first owner and the rest by me. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode