Wiper Motor: What Does This Fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DransportGarage · 04-16-2012, 04:37 PM

I continue to work on my basket case '55 2nd Series shortbed. I took this motor out of the basket today, only to realize that it doesn't fit my truck. It bolts to the dash but not to the firewall. It has 3 wires. (I believe I need one that's a one-speed, and probably has 1 or 2 wires.) So here are the questions:

1) What does this one fit?
2) Would I be able to use the arms if I found the right motor? (probably not since the motor in the Assembly Manual has an arm shaft that points front-to-rear rather than up and down)

Thanks,

04-16-2012, 04:37 PM	#1
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Wiper Motor: What Does This Fit? I continue to work on my basket case '55 2nd Series shortbed. I took this motor out of the basket today, only to realize that it doesn't fit my truck. It bolts to the dash but not to the firewall. It has 3 wires. (I believe I need one that's a one-speed, and probably has 1 or 2 wires.) So here are the questions: 1) What does this one fit? 2) Would I be able to use the arms if I found the right motor? (probably not since the motor in the Assembly Manual has an arm shaft that points front-to-rear rather than up and down) Thanks, Attached Images __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.