Coil springs in my 71 C-10 long bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimcaf · 05-20-2012, 10:29 AM

A couple of months ago I put stock replacement coils in my pickup from Autozone,Measuring from the wheel well opening the back is 3 inches higher then the front,its drives and carries a load great but when I hook up a trailer it so jacked up I cant see it without pulling off my tailgate off and Im not liking the looks of it. I see CCP has a set of 3 inch drop springs on special for $99 shipped,,will this be a good fix or should I be looking for 2 inch? I occasionally use the truck for towing and picking up fire wood,,,thanks jim

05-20-2012, 10:29 AM	#1
jimcaf Registered User Join Date: Nov 2011 Location: Valley Center,CA Posts: 89	Coil springs in my 71 C-10 long bed A couple of months ago I put stock replacement coils in my pickup from Autozone,Measuring from the wheel well opening the back is 3 inches higher then the front,its drives and carries a load great but when I hook up a trailer it so jacked up I cant see it without pulling off my tailgate off and Im not liking the looks of it. I see CCP has a set of 3 inch drop springs on special for $99 shipped,,will this be a good fix or should I be looking for 2 inch? I occasionally use the truck for towing and picking up fire wood,,,thanks jim __________________ 1971 Chevy C-10, 5.3, 4L60E,4.10 gears UNDER CONSTRUCTION Mid size bed conversion https://picasaweb.google.com/1114721...yC10MidSizeBed The basic buildup https://picasaweb.google.com/1114721...3/1971ChevyC10

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.