Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-04-2003, 09:50 PM | #1 |
Registered truck nut
Join Date: Dec 1999
Location: Mt. Vernon, Washington, USA
Posts: 1,584
|
65 frame/front 72 disc brake/steering questions?
I'm putting a 72 front crossmember complete with all 72 steering linkage ect. into my 65? Short 2wd frame.
Questions: -I noticed that the rod that hangs off the passenger side frame and attaches to the steering linkage is bent differently/more of an angle then the original one. What's the name of this rod for future reference? Should I drill a new upper hole or put the original back on. I'm not sure why they are bent differently. Does it have to do with the 3/8" dimples that were on the 72 frame attachment points? -When putting on the 72 Power steering box. Can I just use some 3/8" flat stock to compensate for the 65 not have the dimples to clear the steering box? Then simply drill 2 new holes. Thanks in advance
__________________
MOUNT VERNON, WASH. STATE Need a part? Just PM me |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|