Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-13-2012, 02:12 PM | #1 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
No Limit Wide-Ride C10 IFS 63-87
There is an install article in the current StreetTrucks so we wanted to lay out some more info for you. The track width is 63". We can offer any 5 lug bolt pattern, but not 6 lug. They are available with a Coil-Over, a Shockwave, or a Bag & Shock. With a 28" tall tire the bottom of the frame rail just behind the tire will be appx. 6". Drop spindles are available, but not recomended, as a bag and shock set up will lay the frame with stock spindles, and the geometry is better. Motor mounts are included and will fit SBC, BBC, and LS.
The complete kits list at $2950, including P/S and swaybar. To help out with the build process, we are offering the C10 Wide-Ride in a three step purchase. Step 1. You get the main crossmember, motor mounts, Upper A-arm cams, and the lower A-arms. This will get the basic mounting hardware in place and allow you to set the motor and trans in so that you can keep building. Step 1 package is $1195.00 Step 2. The working suspension. This package includes the upper A-arm, spindles and A) coil-overs, or B) bags and shocks, and all of the needed hardware. You'll be one step closer. $995.00 Step 3. Wrap it up. This package gets it done. It includes the rack and pinion, sway bar, rotors, calipers, bearings, seals, pads, and all the hardware needed. $885.00 Hopefully this will help with the budgeting of your build, and help you to keep the project moving forward.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! Last edited by robnolimit; 08-13-2012 at 03:17 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|