Wiring Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mlevario99 · 02-03-2013, 05:07 PM

I have a 5.3 in a 66 chevy truck. I am using a fuse block from CURRENT Performance, I have used the same fuse block in another swap. Here is the problem, if I remove the ignition power relay and I turn the key to the on position, I have power to the relay socket on the battery side and on the pink/black wire coming from the 12v source, as soon as I install the relay in the socket, I do not have power on the pink/black wire, I have had this problem before, but it fixes on its own, so I do not know what to do. Any help please
Thanks

02-03-2013, 05:07 PM	#1
mlevario99 Registered User Join Date: Apr 2010 Location: El Paso, TX Posts: 160	Wiring Question I have a 5.3 in a 66 chevy truck. I am using a fuse block from CURRENT Performance, I have used the same fuse block in another swap. Here is the problem, if I remove the ignition power relay and I turn the key to the on position, I have power to the relay socket on the battery side and on the pink/black wire coming from the 12v source, as soon as I install the relay in the socket, I do not have power on the pink/black wire, I have had this problem before, but it fixes on its own, so I do not know what to do. Any help please Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.