Crossover steering question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIG V · 03-28-2013, 01:50 AM

My other question is if its wrong that the draglink hits the right leaf spring when the right side of the truck drops. Did I do something wrong or is this normal?

Get on parts mike's website and buy his 1/2 inch spacer for the crossover arm. Do your arms have 3 or 4 holes? When you put the studs in the knuckle did you put the shorter threads in the knuckle or the longer threads in the knuckle? The first crossover steering i did on a chevy was in 1997 and i cut my arm out of 1 inch cold roll with a torch....
Posted via Mobile Device

03-28-2013, 01:50 AM	#25
BIG V Registered User Join Date: Jul 2009 Location: Northern California Posts: 411	Re: Crossover steering question My other question is if its wrong that the draglink hits the right leaf spring when the right side of the truck drops. Did I do something wrong or is this normal? Get on parts mike's website and buy his 1/2 inch spacer for the crossover arm. Do your arms have 3 or 4 holes? When you put the studs in the knuckle did you put the shorter threads in the knuckle or the longer threads in the knuckle? The first crossover steering i did on a chevy was in 1997 and i cut my arm out of 1 inch cold roll with a torch.... Posted via Mobile Device __________________ 1991 Chevy suburban 3/4 ton 4x 4:56 and pulls great 1979 Chevy 1/2 ton long bed diesel 1974 Chevy crew cab short bed 3/4 ton 4x4 project 1991 Chevy suburban 2wd 1984 Chevy suburban 3/4 ton 4x 6.5 detroit with turbo 1961 Chevy pickup 1/2 ton 2wd 1975 gmc crew cab short bed 2wd

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.