help! questions about s10 frame swap. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

98layinframe · 06-05-2013, 08:13 AM

Im sure this has been answered many a time before.. but for some reason im not seeing it currently.

A buddy and a I are in the process of mounting his 51 cab to an s10 frame. The difference with this build is its getting mounted to a 4wd frame which are a little taller under the cab area. Another problem is he doesnt have a set of running boards to help set the cab height of of.

So my main question is.. can anyone tell me what their measurement from the bottom of the rocker/door down to the bottom of the frame is? Im planning to set the running boards level with the bottom of the frame.
Posted via Mobile Device

06-05-2013, 08:13 AM	#1
98layinframe Registered User Join Date: Oct 2011 Location: Pittsburgh Pa Posts: 267	help! questions about s10 frame swap. Im sure this has been answered many a time before.. but for some reason im not seeing it currently. A buddy and a I are in the process of mounting his 51 cab to an s10 frame. The difference with this build is its getting mounted to a 4wd frame which are a little taller under the cab area. Another problem is he doesnt have a set of running boards to help set the cab height of of. So my main question is.. can anyone tell me what their measurement from the bottom of the rocker/door down to the bottom of the frame is? Im planning to set the running boards level with the bottom of the frame. Posted via Mobile Device __________________ 91 s10 - bagged bodydropped 4", 350/700R4, narrowed reared, cantilever rear air bag setup 1951 chevy 3100 - in build/acquiring parts process. Have full C4 Corvette suspension front and rear, tpi 350, 700r4, 18" torque thrust II wheels

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.