|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
06-18-2013, 02:16 PM
|
#1 |
|
Registered User
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
|
UCA contacts spindle when chassis on jack stands.
Almost done with my front suspension when I noticed the upper control arm contacts the spindle when suspension is hanging. This keeps the spindle from turning when on jack stands. Is this normal?
Specs: 67 C10 Stock C-arms (w/original alignment shims installed on uppers) New Moog shafts New Moog ball joints (73+) New upper and lower bump stops New Western Chassis 2.5 drop spindles (73+) New 1" drop coil from Brothers trucks See the blue tape at the contact point in the pic. Any thoughts? I don't have anything older to compare it to. Posted via Mobile Device Posted via Mobile Device
__________________
Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode