|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
07-29-2013, 12:07 AM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
oil coming out of breather.
I just got my old truck back and now when i bring it off Idle and get into the mid rpm range it forces oil out of the breather hole on the drivers valve cover.
The holley I have on the carb does not have a large PVC port on it so its not hooked up now. Is this causing the oil to come out? too much crank case preassure maybe. if so I can T is off were the power break fitting is right? thanks.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode