transfer case mounting cushions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61K10 · 11-13-2013, 05:07 PM

bought prothane cushions for my 61with the 221 t/f case. the sleeves id is bigger 5/8" not 1/2"---so just use bigger 5/8" bolts? how about 5/8" cap bolts (allen head)? box reads years 60-72. the one hole in the top of the x-member would have to opened up to fit a socket on the bolt head (thus the cap bolt). i also have 2 spacers that go on top of the mounting bracket.--stock? would have to be drilled also. thick cushions on top i would think? (my old ones were home made)

so what have you guys done?

11-13-2013, 05:07 PM	#1
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	transfer case mounting cushions bought prothane cushions for my 61with the 221 t/f case. the sleeves id is bigger 5/8" not 1/2"---so just use bigger 5/8" bolts? how about 5/8" cap bolts (allen head)? box reads years 60-72. the one hole in the top of the x-member would have to opened up to fit a socket on the bolt head (thus the cap bolt). i also have 2 spacers that go on top of the mounting bracket.--stock? would have to be drilled also. thick cushions on top i would think? (my old ones were home made) so what have you guys done? Attached Images __________________ 1961 chevy K10 my build is------------61K10 build Last edited by 61K10; 11-13-2013 at 05:17 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.